Inverter is indispensable in a PV system. But not every inverter is equipped with a surge protector. Some newer and more advanced inverter models have built-in surge protection as a standard feature, while certain inverters may not have it. For those without built-in surge protection, external surge protection devices need to be installed to safeguard the inverter and the entire PV system.
Regarding the installation locations of the spd surge protector in a PV system, the following are common practices:
· DC Side:
· Usually, two surge protectors can be installed on the DC side of the inverter. One is as close as possible to the PV array (when the distance between the inverter and the PV array is ≥ 10 m, it is generally required; if the distance is less than 10 m and certain conditions of the voltage protection level of the surge protector are met, it may not be necessary in some cases). The other is close to the DC input of the inverter 6.
· In the DC combiner box, a Class 1+2 or Class 2 DC surge protector can be installed to protect the PV modules and the DC side of the inverter from overvoltages caused by lightning induction or direct strikes1.
· AC Side:
· Generally, two surge protectors are installed on the AC side of the inverter. One is installed near the connection between the inverter and the main power distribution cabinet (when the distance between the surge protector of the main power distribution cabinet and the inverter is ≥ 10 m, it is usually required; if the distance is less than 10 m and certain conditions are met, it may not be necessary). The other is as close as possible to the inverter's AC output6.
· In the AC distribution box, a Class 1+2 or Class 2 AC surge protector can be installed to protect the AC side of the inverter and the grid connection from overvoltages caused by lightning induction or direct strikes1.
· In the main power distribution cabinet of the PV system, a Class C surge protector can be installed to protect against AC side lightning currents and overvoltages2.
In addition, for communication lines (such as RS 485 and Ethernet) in PV systems where there is a risk of induced surges, external designated surge protection devices should also be installed.
Choosing and Applying AC SPDJuly 3, 2024With the continuous development of modern power systems, AC surge protection devices (SPD) are playing an increasingly important role in power systems. AC SPD can effectively protect electrical system...viewDo Surge Protectors Stop Electrical Fires?May 14, 2025Surge protectors (SPDs) can effectively reduce the risk of electrical fires caused by surges when designed, installed and maintained in accordance with international standards (such as the IEC 61643 s...viewTerms and definitions of IEC 61643-11: LOW-VOLTAGE SURGE PROTECTIVE DEVICES （1/2）December 8, 2022The professional explanation of the main terms of surge protective devicesviewBudgeting for Stability: The Cost-Effective Approach to SPD for Power SupplyJanuary 5, 2024In the intricate landscape of power management, Surge Protection Devices (SPDs) for power supply stand out as cost-effective guardians, ensuring stability without breaking the budget. This passage del...viewThe Difference Between Surge Protector and Leakage ProtectorOctober 25, 20211. The introduction of lightning surge protector and leakage protector(1) Lightning surge protectorLightning surge protector, also called lightning protection device, is an electronic equipment which ...viewWhat is type 2 surge protection？February 24, 2023What is type 2 surge protection？view
EN
jp 
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
ro 
bg 
nl 
